Chevy C10 Truck Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I am looking at a new set of US Mag wheels for my 71 c10. Has been lowered 4" in front and 6" in rear. I am looking at 20X8 wheel in the front and 20X10.5 wheel in the rear. I want to get the rear tire out to the edge of the wheel well. What offset do I need?

Thanks in advance
Danny
 

·
Administrator
Joined
·
3,966 Posts
I am looking at a new set of US Mag wheels for my 71 c10. Has been lowered 4" in front and 6" in rear. I am looking at 20X8 wheel in the front and 20X10.5 wheel in the rear. I want to get the rear tire out to the edge of the wheel well. What offset do I need?

Thanks in advance
Danny
Without being there its hard to determine, pull your current wheel off, hang a string with a small weight on the inside edge of the wheel well, ensure that the truck is at ride height and level, measure distance from wheel mounting surface to string, allow one inch from fender( it still may rub with that size wheel on turns on an incline) here`s a little info to help.. http://www.tirerack.com/wheels/tech/techpage.jsp?techid=101
 
1 - 2 of 2 Posts
Top