Chevy C10 Truck Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi all,

I am trying to replace the front (and eventually the rear) coil springs on my '61 apache. I looked at LMC Truck but their parts are not recommended for trucks with engines around 400 cubic inches. Any idea where to find the appropriate springs?

On a related note, I am trying to return the front end to its original height- the previous owner used drop spindles from LMC Truck, but they do not sell stock height spindles... Anyone know where to find stock parts?

thanks,
****

fahne19
 

·
Administrator
Joined
·
3,966 Posts
There are some shops that might have some New Old Stock...but thats a bunch of searching, with the majority swapping to drop spindles you can find someone easily to swap for your drop spindles with their stock spindles I`m sure... maybe even on here...! I find it funny that LMC says around 400 inches...they ( chevy) has a small block 400.....chevy 235 was 630 lbs, the 292 was 650 lbs...
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top