Chevy C10 Truck Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
I am designing a custom fuel tank for my '62 C10 and forgot to do one important measurement before disassembling the truck. I forgot to check the ride height, which would help a few things. I have a reprint of the shop manuals and the owners manual, but neither have the ride height. Can anyone tell me the height at the front and rear of the chassis. At stock or any drop(with the drop height).
 

·
Registered
Joined
·
493 Posts
Data shown above by cffisher is applicable to either 63, 64 or 65 model year.... not sure which. It'll be similar but since your '62 has a different frame and cab it may indeed be slightly different dimensionally and weight... depending on which model truck you have (1/2 ton vs 3/4 ton, swb vs lwb).

Differences are likely negligible... but in case your curious here's a link to the GM Heritage Data for the 1962 Model Year trucks: https://www.gmheritagecenter.com/do...its/Chevrolet-Trucks/1962-Chevrolet-Truck.pdf
 
1 - 4 of 4 Posts
Top