Chevy C10 Truck Forums banner

Rear End ???

10K views 9 replies 5 participants last post by  406Rich 
#1 ·
I need to know what 70's or 80's rear end will fit my 65 chevy C10. Thanks. Lewis
 
#2 ·
Are you staying with 6 lug or changing to five, they used 6 lug til about `68 I believe, the housing are the same width up to `70 but change to five lug in 69/70, any of these will bolt right in, you can use any rear axle up thru ``05 with some minor changes to the track bar, a new kit from POL and perch blocks will need to be added on.
 
#4 ·
You are correct Goose, althought the 70 on up are 1.5 inches wider they still fit, he will need a track bar conversion.
 
#8 ·
He can also redrill the rear hubs for five lug and just buy new drums....just a cost thought.
 
#10 ·
Ray thanks for waking me up...I knew that too, CPP or ECE POL they all sell them...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top