Chevy C10 Truck Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
just picked up a 1961 Apache..... rusting back to the earth it came from, but that's why i bought it! came from Georgia with Georgis bulldogs all over it and is red and white and rust, will stay that way keeping it's heritage. I clipped in a 1984 c10 frame at fire wall forward (not just the crossmember, i used rails and all) 350 vortec with carb and HEI , 700r4 trans, 84 3:73 c10 rear. plus a 27 gallon fuel tank. built to be reliable and simple
I building for the wife a 1951 5 window stepside, deskined a 2001 s10 tub and put the skin of the 51 over it (so the inside is all s10 and the outside is 51) stretched s10 frame 22 inches.. put in 2007 SS trailblazer LS engine/trans/transfer case making it AWD , caddy stabilitrack brake/traction control system
wife,s current car is a 1955 belair AWD. as you guess by now an S10 frame clipped in torsion bar forward, TBI 350 from "k" blazer with 88 monte carlo complete interior dash console and seats, built that 13 years ago getting rough now time to replace
my current ride is an 1986 Fiero with 2007 SS impala LS4 V8 mounted sidewinder in stock fiero location behind seats (mid engine)
 

·
Administrator
Joined
·
3,966 Posts
Welcome to the forum, you got some nice builds, post pics when you can...!sign0016
 
1 - 5 of 5 Posts
Top