Looking for any answers on converting my 1970 C20 to a lowered C10 suspension. Before anyone one just tells me i should of just bought a C10...the answer to that is a found the truck i wanted with the options i wanted for under my price i wanted to spend and even has an overdrive trans in it. So needless to say i went for it even though it was a 3/4 ton truck. So the truck is all stock now for suspension and what i am looking to do it lower the truck and end up with a 1/2tons suspension under it.
Wanting to know if anyone can tell me if the 1/2 ton front springs will go right into the place of the 3/4 ton coil springs.
Do i have to change A-arms to run 1/2 ton spindles....if so are C10 A-arms a direct bolt onto the 3/4 ton frame.
I have many more questions but i will let this be all for now