Hey all, have any of you had issues immediate or later, shooting these 2 part epoxy primers over the old finishes of these trucks?
We have some of the body down to bare metal and other parts of paint are 80 grit sanded.
We did a lacquer thinner test on a spot and the old paint got a bit soft but didn't rub off.
What's your thoughts on shooting it with the 2k primer??
Going to run into issues or should be ok? Using Automotive Art Epoxy Primer LV 45-96 product.
Epoxy primers make for good sealer.If you wait to long youll have to sand I did my whole truck in epoxy top to bottom inside and out after sandblasting to keep from rusting.Followed that with 2k urethane,more sanding then color and clear